img
img
img img img img img img img img img img img img img img img img
img img img img img img img img img img img img img img imgimg fr img
img
img
      img

       img

      img
  1. Product Name: ELITE Double Wire Fence SystemTM


  2. Product Manufacturer:

    OMEGA II FENCE SYSTEMS ™
    A division of Metaltech - Omega inc.

    1735 St. Elzear blvd. West, Laval, Quebec H7L 3N6
    Tel : (450) 686-9600 Fax : (450) 681-5318
    1-800-836-6342

  3. Product Features and Applications: Behind ELITE’s clean looks lies an affordable system that can take abuse: feel safe and protected !

    The ELITE meets the requirements of a wide range of applications but its sturdier construction is ideal for areas with heavier public usage or with a greater need for security, such as…

    - corporate/university campuses, housing projects, healthcare/research facilities.

    - pools, amusement parks, tennis courts, public parks and playgrounds.

    - airports, highways, overpasses and parking facilities.


  4. Technical Data: The ELITE double wire fence system consists of a very rigid panel and square post assembly both galvanized and coated for longer wear and increased aesthetic appeal.

    The panels are fabricated from heavy-duty steel wire ( 2 x 4-Ga. horizontal and 1 x 4-Ga. vertical ) welded at each intersection into a solid one-piece mesh sheet, which can easily be stacked to heights of up to 24’. The panels come in three standard sizes, 4’, 6’ and 8’ with 2” x 8” mesh openings. The panels are galvanized then polyester powder coated. Custom panel sizes or openings are available upon request. Although the panels can be easily trimmed during the installation, there is no weak link and no possible unraveling. References: ASTM A182 and ASTM A185 .

    The 2”x 2” or 3” x 3” square posts are available for in-ground or flanged applications. Unlike chain link, there is no need for larger end or corner posts because the panels are self-supporting. The posts are cold rolled from 1008 grade steel and meet ASTM 513-00 and ASTM A787-01, G90 zinc coating (galvalume process), then polyester powder coated. Minimum requirement for the 2” x2” post: gauge 16 for 4’H and 5’H panel - gauge 11 for 6’H and 8’H panel.

    The heavy duty Universal post bracket kits allow for straight line and 90° turns. For different angles, use the “ Universal angle brackets ” . Both brackets are made of steel hardware and are composed of a collar, wire retaining plate, bolt, washer and tamper-proof nut with a galvanized finish. Special panel fittings (SPF) are available to attach panels to post, wall, floor, ceiling, masonry etc.

    Standard colors is black. Other optional colors are readily available (for example : textured taupe brown, textured blue, dark green, foliage green, dawn yellow, brown, fog grey, storn grey, pewter grey, white) as well as the optional antique hammer finish (gold, silver, copper). The finish is high adherence, electrostatic polyester powder coating with high UV stability, impact, corrosion, heat and humidity resistance. Contact Omega II for costs and lead times on other color selections. References: ASTM D 3359 (1990) - Method B/ D 2794 (1990) / B 117 (1990) / D 2247 (1988).

    A wide selection of gates are available. The swing gates, whether single or double, shall be made in accordance with ASTM F900 (1984) and the sliding gates shall be fabricated in accordance with ASTM F1184, Class 2.


  5. Installation: Installing an ELITE system is fast and easy. Two experienced installers should be able to set 200’ to 250’ per day.

    To install this fence system simply set the posts in concrete, let dry and fasten the panels. Easy panel replacement.

    To impede climbing standard panels come with 1" pickets. Should they not be required, the pickets can be set facing downwards or they can be removed prior to coating the panels.

    Panels can be trimmed on the job site as long as zinc primer and touch-up paint is applied to the cut marks.

    For the fence to follow slopes, it is required to step the fence sections. When faced with a steep slope, it will be necessary to order longer posts and panels cut in half as to keep the gap under the panel to a minimum. A very steep slope may require a portion of the panel to be buried but this is only recommended when the manufacturer supplies specially coated panels.

  6. Availability and Cost: Omega II Fence Systems are available all through North America by means of a well-established network of distributors. The average lead-time for a commercial project coated in one of our standard colors is 3-4 weeks. Pricing is competitively set between chain link and high-end tubular steel fences.

    For immediate installed budgetary figures per fence heights, please click on Get an Estimate. For exact material pricing or referrals to experienced fence contractors, please call 1-800-836-6342 OR send an e-mail to information@omegafence.com.


  7. Limited warranty: 10 year coverage against corrosion and defects to the coating for standard panels and posts under normal conditions. 5 year full coverage on gates.


  8. Maintenance: None required since steel components are galvanized then polyester powder coated.


  9. Technical Services: Omega II Fence Systems stands ready to assist you with your fencing requirements. Call 1-800-836-6342 or visit our web site at www.omegafence.com for a complete specification outline, installation instructions and CAD details. You can also select to work with one of our independent architectural agents by clicking on Contacting Team Omega.


  10. Filling systems: Listed in Sweets catalogue: 32 31 00/OME.- BuyLine 4133

Issued December 2005
 img

OMEGA II FENCE SYSTEMS ™
A division of Metaltech - Omega inc.

1735, Boul. St-Elzéar West
Laval (Quebec), Canada
H7L 3N6

1-800-836-6342
Tel.: 450-686-9600
fax: 450-681-5318




Last update july 2007.